. . . . .
OPTIONS AND TECHNICAL DATA
CheckMate™ Hold Down Conveyor
2-9317-600-00-0 Aquastorm™ Series Options Guide 2-27
CheckMate™ Hold Down Conveyor
Introduction When cleaning lightweight or small product that could become airborne due to
water or air pressure, the CheckMate™ hold down conveyor option is used to hold
product in place. The CheckMate™ conveyor belt is the same mesh as the
standard conveyor and lays down loosely on top of product and the standard
conveyor.
Photograph Figure 2–6 shows a standard inlet conveyor and optional CheckMate™ conveyor
configuration:
Figure 2–6