OPTIONS AND TECHNICAL DATA
Water Balance
2-30 Aquastorm™ Series Options Guide Rev. 1
2
Section H:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pH Monitor
Water Balance
Introduction The Aquastorm™ wash tank can be fitted with a pH monitor to track the acidity or
alkalinity of the water used in the prewash and wash processes.
Photograph Figure 2–9 shows the pH monitor unit installed in the wash tank:
Figure 2–9
Wash Water Pump Filter
pH Monitor Assembly
Buffer Solution Cap
Immersion Heaters (2)