. . . . .
DETERGENT INJECTION
Cascade Set Up
2-9317-600-00-0 Aquastorm™ Series Options Guide 9-177
Cascade Set Up
Introduction When cleaning rosin flux applications using saponifiers, ensure chemicals are kept
separated. Adjust the cascade pipe ball valve as described. There are several
procedures required to complete cascade setup.
Safety To ensure personal safety and avoid equipment damage observe the following:
CAUTION
Arrange for two (2) people to move or lift the storage tank to avoid possible
injury.
Diagram Figure 9–6 is a cascade reference drawing for an Aquastorm 200™ system.
Figure 9–6
External Feed Chemical
Isolation Line (Optional)
Split Fill Line
(Optional)
Final Rinse Line (Inlet)
Fill Line (Inlet)
Dryer #2
Dryer #2Dryer #1
Final
Rinse
Rinse
Chemical
Isolation
WashPrewash
Dryer #1
Final
Rinse
Rinse
Chemical
Isolation
WashPrewash
Standard Drain
(Outlet)
Split Drain
(Outlet)
(Optional)
Machine
Exit End
Machine
Entrance End
Top View
Front View
Configurable
To Drain
Configurable
Cascade
Weer to Drain
Configruable
Cascade
Configurable Cascade
(Optional Chemical Isolation Tank)
Weer to Drain
Cascade
System Drains
To Next Page