DETERGENT INJECTION
Overview
9-180 Aquastorm™ Series Options Guide Rev. 1
9
Section C:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preventive Maintenance
Overview
Introduction A strong preventive maintenance program is the best method to cut costs,
increase system reliability, and enhance productivity. The time used for cleaning,
inspecting, and servicing ensures consistent production quality and increases the
extended service life of the machine.
Safety To ensure personal safety and avoid equipment damage observe the following:
CAUTION
Qualified maintenance staff should perform the following cleaning steps. If any
damage to the plumbing, assembly, or nozzle is detected, contact Electrovert
Customer Service.
CAUTION
Arrange for two (2) people to move or lift the storage tank to avoid possible
injury.
Maintenance Schedule Refer to the following maintenance schedule to ensure proper machine and option
operation.
List of procedures Use the following procedures to complete preventive maintenance procedures
Quarterly Maintenance — Every 480 Hours of Operation
Cleaning Procedure Reference
Check and clean vinyl tubing
Clean stainless steel strainer at vinyl tubing end
Check low level sensor and electrical
connections
Empty and clean saponifier storage tank
Topic Page
General Cleaning 9 – 181
Clean Vinyl Tubing and Strainer 9 – 182
Drain Tank and Check Low Level Sensor 9 – 184
Fill Tank and Resume System Operation 9 – 186
To Next Page
Loading...