BAG FILTERS
Description
13-238 Aquastorm™ Series Options Guide Rev. 1
13
Section A:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Description
Description
Introduction When particle contamination directly affects the cleaning process, bag filters
offer an increased level of filtration. When installed and connected, the wash or
rinse module automatically runs water through the bag filter.
All Aquastorm™ systems can have a bag filter installed in the wash module. Only
Aquastorm 200™ systems can have a bag filter installed in the rinse module.
Photographs Figure 13–1 shows the Aquastorm Series™ wash module and Aquastorm 200™
recirculating rinse module bag filter cylinder locations.
Figure 13–1
Aquastorm 200™ Rinse Module