Speedline Technologies ELECTROVERT Aquastorm - Inlet and Exit Conveyor Extensions

OPTIONS AND TECHNICAL DATA
Inlet and Exit Conveyor Extensions
2-26 Aquastorm™ Series Options Guide Rev. 1
2
Inlet and Exit Conveyor Extensions
Introduction When operating an Aquastorm™ system in an in-line conveyor production
configuration, the Angle Adjust Inlet Conveyor provides the ability to adjust inlet
conveyor height to match the exit conveyor of the previous machine in the in-line
production environment. The Extended Exit End Conveyor allows product to feed
efficiently into the next process in the in-line production environment.
Photograph Figure 2–4 displays an optional 609.6 mm (24 in.) wide angel adjust entrance
end conveyor option and Figure 2–5 shows an optional 609.6 mm (24 in.) wide
extended exit end conveyor:
Figure 2–4
Figure 2–5