. . . . .
CONVEYOR ENHANCEMENTS
Functional Description
2-9317-600-00-0 Aquastorm™ Series Options Guide 6-93
Functional Description
Introduction When cleaning lightweight or small product that could become airborne due to
water or air pressure, the CheckMate™ hold down conveyor option is used to hold
product in place. The CheckMate™ conveyor belt is the same mesh as the
standard conveyor and lays down loosely on top of product and the standard
conveyor. By using the same mesh, cleaning is not compromised and product is
not subjected to potential damage.
Photograph Figure 6–9 shows a standard inlet conveyor and optional CheckMate™ conveyor
configuration:
Figure 6–9
To Next Page
Loading...