. . . . .
PASSWORD PROTECTION
Overview
2-9317-600-00-0 Aquastorm™ Series Options Guide 4-59
Configuration
Procedure
Configure the keyswitch as follows
1. Insert Key #3 into the keyswitch tumbler and turn it to position #3.
2. Press the menu key on the LCD interface keypad to access configuration
screen #1.
3. Press the page down key twice to display configuration screen #3.
4. Press the enter key to toggle to Enable and indicate the password keyswitch
is installed.
5. Press the enter key to accept the configuration.
6. Press the Menu key to accept the changes.
7. Result: The update screen displays and the system returns to the main menu.
8. Begin system operation. For detailed information refer to the Aquastorm 200™
or Aquastorm 100™ Operation Manual.
To Next Page
Loading...