Topcon Pocket-3D - Page 186

Data Menu
Pocket-3D Reference Guide
3-76
– Width: enter the width of the field.
Figure 3-112. Enter Line Item Information
• Edit – on the Line items tab (Figure 3-112), press to edit the
selected line item. See the “Add” bullet on page 3-75 and
Figure 3-112 above for details on editing the line item.
• Delete – on the Line items tab (Figure 3-112), press Delete to
delete the selected line item.
The Import rules tab on the conversion formats parameters dialog
box adds, edits, or deletes import rules for the selected conversion
format (
Figure 3-113 on page 3-77).
• Add – on the Import rules tab (Figure 3-113 on page 3-77), press
to display the import rules dialog box. displays to add an import
rule and it’s respective information, then press Ok to save the
information (
Figure 3-113 on page 3-77).
– Rule: select either Skip header lines or Skip prefixed lines.
– Number of lines: enter the desired number of header lines to
skip during import.
– Prefix: enter the desired number of prefixed lines to skip
during import