TRENDnet TL2-E284 - Arp Timeout; Ip Address

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
15-3
Command Modes
Global Configuration Mode
User Guidelines
The no form is to remove the entry.
Example
switch(config)# arp 10.90.90.100 11:22:33:44:55 vlan 1
Command History
Version
History
1.00.001
This command was introduced.
arp timeout
To set the ARP table timeout.
Command
arp timeout <seconds (30-86400)>
no arp timeout
Syntax Description
seconds (30-86400)
ARP entry timeout period
Default Settings
300
Command Modes
Global Configuration Mode
User Guidelines
The no form is to reset to default value.
Example
switch(config)# arp timeout 3600
Command History
Version
History
1.00.001
This command was introduced.
ip address
To configure the IP address of interface.
Command
ip address <ip-address> <subnet-mask> <gw-address>
no ip address <ip-address>
Syntax Description
ip-address
IP address of the interface
subnet-mask
Subnet mask of the interface
gw-address
IP address of the gateway