TRENDnet TL2-E284 - Chapter 29 Mstp Command; Mstp Command List; Spanning-Tree Priority; Spanning-Tree Mst Configuration

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
29-1
Chapter 29
MSTP Command
MSTP Command List
 spanning-tree priority
 spanning-tree mst configuration
 spanning-tree mst max-hops
 spanning-tree mst max-instance
 instance
 name
 revision
 spanning-tree mst hello-time
 show spanning-tree mst
 show spanning-tree mst interface
 show spanning-tree mst configuration
spanning-tree priority
To set the bridge priority of spanning tree.
Command
spanning-tree [mst <instance-id>] priority <value(0-61440)>
no spanning-tree [mst <instance-id(1-64)>] priority
Syntax Description
mst instance-id
Specify the priority of which MST instance to configure.
priority
value(0-61440)
Specify the bridge priority of spanning tree.
Default Settings
32768
Command Modes
Global Configuration Mode
User Guidelines
MST instance configuration is only available when MSTP is running.
Example
switch(config)# spanning-tree mst 10 priority 1
Command History
Version
History
1.00.001
This command was introduced
spanning-tree mst configuration
To enter MSTP Configuration Mode