TRENDnet TL2-E284 - Dscp Map-Type; Cosq Scheduling Algorithm

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
40-2
Syntax Description
priority value(0-7)
Specify which priority to map.
traffic-class
Traffic class
value(0-3)
Specify which switch queue to map.
Default Settings
Priority Default traffic class
0 0
1 0
2 1
3 1
4 2
5 2
6 3
7 3
Command Modes
Global Configuration Mode
Example
switch(config)# vlan map-priority 0 traffic-class 1
Command History
Version
History
1.00.001
This command was introduced
dscp map-type
To set the dscp type and queue mapping.
Command
dscp map-type <integer(0-63)> traffic-class <integer(0-3)>
Syntax Description
integer(0-63)
Specify which DSCP type to map.
traffic-class
integer(0-3)
Specify which switch queue to map.
Command Modes
Global Configuration Mode
User Guidelines
DSCP must be enabled before configuring this command.
Example
switch(config)# dscp map-type 63 traffic-class 0
Command History
Version
History
1.00.001
This command was introduced
cosq scheduling algorithm
To choose the scheduling algorithm for switch queues.