TRENDnet TL2-E284 - Show Mac-Address-Table Aging-Time; Show Mac-Address-Table Count; Show Mac-Address-Table Dynamic Multicast

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
33-5
Command
show mac-address-table aging-time
Command Modes
Privileged EXEC Mode
Example
switch# show mac-address-table aging-time
Mac Address Aging Time: 300
Command History
Version
History
1.00.001
This command was introduced
show mac-address-table count
To display the statistics for each kind of MAC address in MAC address table.
Command
show mac-address-table count [vlan <vlan-id(1-4094)>]
Syntax Description
vlan
vlan-id(1-4094)
Specify information of which VLAN to display.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display all statistics when executing the command without a given
VLAN parameter.
Example
switch# show mac-address-table count vlan 1
Mac Entries for Vlan 1:
--------------------------
Dynamic Unicast Address Count : 2
Dynamic Multicast Address Count : 1
Static Unicast Address Count : 2
Static Multicast Address Count : 2
----------------------------------------
Command History
Version
History
1.00.001
This command was introduced
show mac-address-table dynamic multicast
To display the multicast MAC address dynamic learned in MAC address table.
Command
show mac-address-table dynamic multicast [vlan <vlan-range>]
[address <aa:aa:aa:aa:aa:aa>] [{interface <interface-type>
<interface-id>}]