TRENDnet TL2-E284 - Mtu; Show Interfaces

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
44-2
Command
shutdown
no shutdown
Default Settings
Interfaces had been created are active by default.
Command Modes
Interface Configuration Mode
User Guidelines
The no form reactivates the interface.
Example
switch(config-if)# shut down
Command History
Version
History
1.00.001
This command was introduced.
mtu
To setup the Maximum Transmission Unit (MTU) frame size of the interface.
Command
mtu <frame-size(90-1522)>
Syntax Description
frame-size(90-1522)
Default Settings
1500
Command Modes
Interface Configuration Mode
User Guidelines
Interface must be shutdown before configuring MTU size.
Example
switch(config-if)# mtu 90
Command History
Version
History
1.00.001
This command was introduced.
show interfaces
To display the status, configurations or statistics of the interface
Command
show interfaces [{ [<interface-type> <interface-id>]
[{ description | flowcontrol | capabilities | status }] |
port-channel <port-channel-id (1-65535)> }]