TRENDnet TL2-E284 - Debug Vlan; Show Vlan

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
26-4
debug vlan
To enable the debug mode for VLAN.
Command
debug vlan { global | [{fwd | priority | redundancy} [initshut]
[mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]}
no debug vlan { global | [{fwd | priority | redundancy}
[initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer]
[all]]}
Syntax Description
global
Displays the global debug messages for multiple instances.
fwd
Displays the forwarding debug messages.
priority
Displays the VLAN priority debug messages.
redundancy
Displays the redundancy related debug messages.
initshut
Displays the initial and shutdown debug messages.
mgmt
Displays the management related debug messages.
data
Displays the data path debug messages.
ctpl
Displays the control plan debug messages.
dump
Displays the packet dump debug messages.
os
Displays the debug messages for all resources except buffer.
failall
Displays the all failure messages.
buffer
Displays the buffer debug messages.
all
Displays all debug messages.
Default Settings
Disable
Command Modes
Privileged EXEC Mode
User Guidelines
Using no form the disable debug mode.
Example
switch# debug vlan all
Command History
Version
History
1.00.001
This command was introduced
show vlan
To display the VLAN member port information and VLAN number.