TRENDnet TL2-E284 - Show Policy-Map

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
37-3
Example
switch(config-pmap-c)# police 64 exceed-action drop
Command History
Version
History
1.00.001
This command was introduced
show policy-map
To display the settings of a policy map.
Command
show policy-map [<policy-map-num(1-65535)> [class
<class-map-num(1-65535)>]
Syntax Description
policy-map-num
(1-65535)
class
class-map-num
(1-65535)
Command Modes
Privileged EXEC Mode
User Guidelines
Example
switch# show policy-map
DiffServ Configurations:
------------------------
Quality of Service has been enabled
Policy Map 1 is active
Class Map: 1
-------------
In Profile Entry
----------------
In profile action : policed-dscp 2
Out Profile Entry
-----------------
Metering on
Out profile action : none
Command History
Version
History
1.00.001
This command was introduced