TRENDnet TL2-E284 - Debug Dot; Debug Radius

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-9
debug dot1x
To enable the debug mode of 802.1X authentication.
Command
debug dot1x {all | errors | events | packets | state-machine
| redundancy}
no debug dot1x {all | errors | events | packets | state-machine
| redundancy}
Syntax Description
all
Displays all 802.1X debug messages.
errors
Displays error code debug messages
events
Displays event debug messages
packets
Displays packet debug messages
state-machine
Displays state-machine related debug messages
redundancy
Displays redundancy related debug messages.
Default Settings
Disable
Command Modes
Privileged EXEC Mode
User Guidelines
Using no form to disable the debug mode.
Example
switch# debug dot1x all
Command History
Version
History
1.00.001
This command was introduced
debug radius
To enable debug mode for RADIUS.
Command
debug radius {all | errors | events | packets | responses |
timers}
no debug radius