TRENDnet TL2-E284 - Chapter 37 Policymap Command; Policymap Command List; Policy-Map; Class

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
37-1
Chapter 37
Policymap Command
Policymap Command List
 policy-map
 class
 set
 police
 show policy-map
policy-map
To create or enter a policy map.
Command
policy-map <policy-map-number(1-65535)>
no policy-map <policy-map-number(1-65535)>
Syntax Description
policy-map-number
(1-65535)
Specify the policy map ID.
Command Modes
Global Configuration Mode
User Guidelines
Using no form to delete a policy map.
Example
switch(config)# policy-map 1
Command History
Version
History
1.00.001
This command was introduced
class
To associate a class map in policy map and enter the Policy-map Class
Configuration Mode.
Command
class <class-map-number(1-65535)>
no class <class-map-number(1-65535)>
Syntax Description
class-map-number
(1-65535)
Specify the class map IP to associate.
Command Modes
Policy-map Configuration Mode