TRENDnet TL2-E284 - Vlan Restricted; Shutdown Garp

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
27-3
vlan restricted
To enable/disable the restricted VLAN on an interface.
Command
vlan restricted {enable | disable}
Syntax Description
enable
Enalbes VLAN restriction.
disable
Disables VLAN restriction.
Default Settings
Disable
Command Modes
Interface Configuration Mode
User Guidelines
When a port enables VLAN restriction, only static configured VLAN can be learnt
from this interface.
Example
switch(config-if)# vlan restricted enable
Command History
Version
History
1.00.001
This command was introduced
shutdown garp
To shutdown GARP function.
Command
shutdown garp
no shutdown garp
Default Settings
Enable
Command Modes
Global Configuration Mode
User Guidelines
1. GARP cannot be activated if VLAN is shutdown.
2. GARP cannot be shutdown if GVRP or GMRP is activated.
Example
switch(config)# shutdown garp
Command History
Version
History
1.00.001
This command was introduced