TRENDnet TL2-E284 - Debug Ssh

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
18-2
Syntax Description
version
compatibility
The supported version of SSH.
cipher
([des-cbc]
[3des-cbc])
To configure SSH Cipher algorithm. User can choose from
DES (Data Encryption Standard) or 3DES (Triple_Data
Encryption Standard) encryption algorithm in CBC (Cipher
Blocking Chain) mode.
auth
([hmac-md5]
[hmac-sha1])
To configure authentication encryption algorithm. User can
choose two different Hash-based Message Authentication
Codes (HMAC): MD5 (Message-Digest algorithm 5) or
SHA1 (Secure Hash Algorithm).
Default Settings
Version: 2
Cipher: 3DES-CBC
Authentication: HMAC-SHA1
Command Modes
Global Configuration Mode
User Guidelines
When set version compatibility, both SSH version-1 and SSH version-2 will be
supported.
a
Example
switch(config)# ip ssh version compatibility
Command History
Version
History
1.00.001
This command was introduced
debug ssh
To enable the trace level messages of SSH. The no format will reset all settings.
Command
debug ssh {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer] [server]}
no debug ssh {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer] [server]}