24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
12-7
set ip http
To enable or disable HTTP server.
set ip http {enable | disable}
To enable the embedded HTTP server.
To disable the embedded HTTP server.
Global Configuration Mode
switch(config)#set ip http enable
This command was introduced.
To configure the TCP port for HTTP server connection.
ip http port <port-number(1-65535)>
no ip http port
Global Configuration Mode
The no form resets the HTTP port to default.
switch(config)#ip http port 8080
This command was introduced.
To display system information.
To Next Page
Loading...
