TRENDnet TL2-E284 - Instance; Name

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
29-3
Default Settings
64
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the max instance number to default.
Example
switch(config)# spanning-tree mst max-instance 16
Command History
Version
History
1.00.001
This command was introduced
instance
To assign VLAN range to a MST instance.
Command
instance <instance-id(1-64)> vlan <vlan-range>
no instance <instance-id(1-64)> [vlan <vlan-range>]
Syntax Description
instance-id(1-64)
Specify which instance to configure.
vlan vlan-range
Specify which VLAN to map.
Default Settings
Instance 0 – VLAN 1~4094
Command Modes
MSTP Configuration Mode
User Guidelines
Use no form to reset the VLAN mapping to default.
Example
switch(config-mst)# instance 1 vlan 1-100
Command History
Version
History
1.00.001
This command was introduced
name
To set the name for the MST reigon.
Command
name <string(optional max Length)>
no name
Syntax Description
string(optional
max Length)
Specify the name of MST reigon.