TRENDnet TL2-E284 - Show Mac-Address-Table Static Multicast

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
33-7
Example
switch# show mac-address-table dynamic unicast vlan 1
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 00:18:8b:bf:75:30 Learnt Fa0/3
1 00:19:cb:d2:f2:75 Learnt Fa0/11
1 00:22:15:0c:85:6c Learnt Fa0/11
Total Mac Addresses displayed: 3
Command History
Version
History
1.00.001
This command was introduced
show mac-address-table static multicast
To display the static multicast MAC address in MAC address table.
Command
show mac-address-table static multicast [vlan <vlan-range>]
[address <aa:aa:aa:aa:aa:aa>] [{interface <interface-type>
<interface-id>}]
Syntax Description
vlan vlan-range
To display MAC addresses belong to a specific VLAN
range.
address
aa:aa:aa:aa:aa:aa
Specify a specific MAC address to display.
interface
interface-type
interface-id
To display MAC addresses under a specific port.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display all static multicast MAC addresses when executing the
command without given VLAN, address and interface parameters.
Example
switch# show mac-address-table static multicast vlan 1
Static Multicast Table
----------------------
Vlan : 1
Mac Address : 11:22:33:44:55:66
Member Ports : Fa0/5
Status : Permanent
------------------------------------------------
Vlan : 1
Mac Address : 11:33:55:77:99:bb
Member Ports : Fa0/7
Status : Permanent
------------------------------------------------
Total Mac Addresses displayed: 2