TRENDnet TL2-E284 - Sntp Secondary-Ip; Sntp Timezone

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
21-4
Command
sntp primary-ip <ip-address>
Syntax Description
ip-address
Specify the IP address of the primary SNTP server.
Command Modes
Global Configuration Mode
Example
switch(config)# sntp primary-ip 172.17.5.254
Command History
Version
History
1.00.001
This command was introduced
sntp secondary-ip
To set the secondary SNTP server IP address.
Command
sntp secondary-ip <ip-address>
Syntax Description
ip-address
Specify the IP address of thesecondary SNTP server.
Command Modes
Global Configuration Mode
Example
switch(config)# sntp secondary-ip 172.17.5.253
Command History
Version
History
1.00.001
This command was introduced
sntp timezone
To determine the time zone used in order to adjust the system clock.
Command
sntp timezone offset [-] <hour (0-13)> <minute (0-59)>
Syntax Description
offset
The adjustment for time zone relative to GMT.
-
To subtract time to GMT.
hour (0-13)
Specify the number of hours different from GMT.
minute (0-59)
Specify the number of minutes different from GMT.
Command Modes
Global Configuration Mode