TRENDnet TL2-E284 - Show Interfaces Counters

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
44-4
Command
show interface mtu [{ Vlan <vlan-id (1-4094)> | port-channel
<port-channel-id (1-65535)> | <interface-type>
<interface-id> }]
Syntax Description
Vlan vlan-id
(1-4094)
VLAN ID
port-channel
port-channel-id
(1-65535)
Port channel ID
interface-type
interface-id
Specify which interface to show the mtu setting.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display MTU settings for all interface when executing the command
without given parameters.
Example
switch# show interface mtu fa 0/1
Fa0/1 MTU size is 1522
Command History
Version
History
1.00.001
This command was introduced.
show interfaces counters
To display the statistics of interfaces.
Command
show interfaces [{ <interface-type> <interface-id> }] counters
Syntax Description
interface-type
interface-id
Specify the counter information of which interface to
display.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port-channel ID.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display statistics for all interfaces when executing the command
without interface-type and interface-id.