TRENDnet TL2-E284 - Show Class-Map

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
36-2
User Guidelines
The access control list rule must be created before associating.
Example
switch(config-cmap)# match access-group mac-access-list 1
Command History
Version
History
1.00.001
This command was introduced
show class-map
To display the settings of class maps.
Command
show class-map [<class-map-num(1-65535)>]
Syntax Description
class-map-num
(1-65535)
Specify which class map to display.
Command Modes
Privileged EXEC Mode
User Guidelines
System will show all the class map information when executing the command
without a given class map number.
Example
switch# show class-map
DiffServ Configurations:
------------------------
Class map 1
--------------
Filter ID : 1
Filter Type : MAC-FILTER
DiffServ Configurations:
------------------------
Class map 2
--------------
Filter ID : 1
Filter Type : MAC-FILTER
Command History
Version
History
1.00.001
This command was introduced