TRENDnet TL2-E284 - Spanning-Tree Mst Max-Hops; Spanning-Tree Mst Max-Instance

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
29-2
Command
spanning-tree mst configuration
Command Modes
Global Configuration Mode
User Guidelines
Spanning tree mode must be MST before entering the MSTP Configuration
Mode.
Example
switch(config)# spanning-tree mst configuration
switch(config-mst)#
Command History
Version
History
1.00.001
This command was introduced
spanning-tree mst max-hops
To set the maximum hops permitted in MST
Command
spanning-tree mst max-hops <value(6-40)>
no spanning-tree mst max-hops
Syntax Description
value(6-40)
Specify the maximum hop number.
Default Settings
20
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the maximum hop number to default.
Example
switch(config)# spanning-tree mst max-hops 6
Command History
Version
History
1.00.001
This command was introduced
spanning-tree mst max-instance
To set the maximum MST instance of the Switch.
Command
spanning-tree mst max-instance <short(1-64)>
no spanning-tree mst max-instance
Syntax Description
short(1-64)
Specify the max instance number of the Switch.