TRENDnet TL2-E284 - Show MDI-MDIX; Show Port-Monitoring

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
25-5
show mdi-mdix
To display the MDI/MDIX setting on ports.
Command
show mdi-mdix [ interface <interface-type> <interface-id>]
Syntax Description
interface
interface-type
interface-id
Specify which interface to show MDI/MDIX setting
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Privileged EXEC Mode
User Guidelines
System will disply MDI/MDIX setting for all ports when executing the command
without port parameter.
Example
switch# show mdi-mdix
Fa0/1 AUTO/MDI/MDIX is auto
Fa0/2 AUTO/MDI/MDIX is auto
Fa0/3 AUTO/MDI/MDIX is auto
Fa0/4 AUTO/MDI/MDIX is auto
Fa0/5 AUTO/MDI/MDIX is auto
Fa0/6 AUTO/MDI/MDIX is auto
Fa0/7 AUTO/MDI/MDIX is auto
Fa0/8 AUTO/MDI/MDIX is auto
Fa0/9 AUTO/MDI/MDIX is auto
Fa0/10 AUTO/MDI/MDIX is auto
Fa0/11 AUTO/MDI/MDIX is auto
Fa0/12 AUTO/MDI/MDIX is auto
Fa0/13 AUTO/MDI/MDIX is auto
Fa0/14 AUTO/MDI/MDIX is auto
Fa0/15 AUTO/MDI/MDIX is auto
Fa0/16 AUTO/MDI/MDIX is auto
Fa0/17 AUTO/MDI/MDIX is auto
Fa0/18 AUTO/MDI/MDIX is auto
Fa0/19 AUTO/MDI/MDIX is auto
Fa0/20 AUTO/MDI/MDIX is auto
Fa0/21 AUTO/MDI/MDIX is auto
Fa0/22 AUTO/MDI/MDIX is auto
Fa0/23 AUTO/MDI/MDIX is auto
Fa0/24 AUTO/MDI/MDIX is auto
Gi0/1 AUTO/MDI/MDIX is auto
Gi0/2 AUTO/MDI/MDIX is auto
Gi0/3 AUTO/MDI/MDIX is auto
Gi0/4 AUTO/MDI/MDIX is auto
Command History
Version
History
1.00.001
This command was introduced
show port-monitoring
To display the port monitoring settings.