TRENDnet TL2-E284 - Show Mac-Address-Table Dynamic Unicast

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
33-6
Syntax Description
vlan vlan-range
To display MAC addresses belong to a specific VLAN
range.
address
aa:aa:aa:aa:aa:aa
Specify a specific MAC address to display.
interface
interface-type
interface-id
To display MAC addresses under a specific port.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display all multicast MAC addresses dynamic learned when
executing the command without given VLAN, address and interface parameters.
Example
switch# show mac-address-table dynamic multicast vlan 1
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 01:00:5e:7f:ff:fa Learnt Fa0/3, Fa0/11
Total Mac Addresses displayed: 1
Command History
Version
History
1.00.001
This command was introduced
show mac-address-table dynamic unicast
To display the unicast MAC address dynamic learned in MAC address table.
Command
show mac-address-table dynamic unicast [vlan <vlan-range>]
[address <aa:aa:aa:aa:aa:aa>] [{interface <interface-type>
<interface-id>}]
Syntax Description
vlan vlan-range
To display MAC addresses belong to a specific VLAN
range.
address
aa:aa:aa:aa:aa:aa
Specify a specific MAC address to display.
interface
interface-type
interface-id
To display MAC addresses under a specific port.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
Command Modes
Privileged EXEC Mode
User Guidelines
System will display all unicast MAC addresses dynamic learned when executing
the command without given VLAN, address and interface parameters.