TRENDnet TL2-E284 - Ip Igmp Snooping Send-Query; Ip Igmp Snooping Fast-Leave

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-6
received a IGMPv2 leave message.
Command
ip igmp snooping retry-count <1 - 5>
no ip igmp snooping retry-count
Syntax Description
1 - 5
Specify the maximum retries for group specific queries.
Default Settings
2
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the retry counter to default.
Example
switch(config)# ip igmp snooping retry-count 5
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping send-query
To configure if the Switch sends IGMP queries.
Command
ip igmp snooping send-query { enable | disable }
Syntax Description
enable
Switch sends IGMP queries.
disable
Switch does not send IGMP queries.
Default Settings
Enable
Command Modes
Global Configuration Mode
Example
switch(config)# ip igmp snooping send-query disable
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping fast-leave
Enable or disable the IGMP snooping fast leave function on a VLAN.