TRENDnet TL2-E284 - Debug Ssl

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
19-2
Default Settings
SSL server is disabled.
Cipher Suite is RSA-DES-SHA1, RSA-3DES-SHA1, and
RSA-EXP1024-DES-SHA1
Command Modes
Global Configuration Mode
Example
switch(config)# ip http secure ciphersuite rsa-null-md5
Command History
Version
History
1.00.001
This command was introduced
debug ssl
To enable the debug messages of SSL. The no format will reset all settings.
Command
debug ssl {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer]}
no debug ssl {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer]}
Syntax Description
all
Enable or disable all categories of messages.
shut
Shutdown messages.
mgmt
Management messages.
data
Data Path messages.
ctrl
Control panel messages.
dump
Packet Dump messages.
resource
All resource messages except for buffer.
failall
Failure messages.
buffer
Buffer messages.
Default Settings
Disabled
Command Modes
Privileged EXEC Mode
Example
switch# debug ssl all
Command History
Version
History
1.00.001
This command was introduced