TRENDnet TL2-E284 - Chapter 1 Preface; About this Guide; Terms;Usage; About Thi Guide

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
1-1
Chapter 1
Preface
About This Guide
This guide provides instructions on how to install and configure the
TL2-E284 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports
and 2 Shared Mini-GBIC Slots.
This guide is mainly divided into four parts:
1. Hardware Installation: Step-by-step hardware installation
procedure.
2. Using Web User Interface: A startup guide to for the command
line interface.
3. Command Reference: Information about the function
descriptions and configuration settings.
Terms/Usage
In this guide, the term “Switch” (first letter capitalized) refers to this
Switch, and “switch” (first letter lower case) refers to other Ethernet
switches. Some technologies refer to terms “switch”, “bridge” and
“switching hubs” interchangeably, and both are commonly accepted
for Ethernet switches.
Note
Alerts you to supplementary information.
Caution
Indicates potential property damage or personal injury.