TRENDnet TL2-E284 - Chapter 25 Port Manager Command; Port Manager Command List; Monitor Session

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
25-1
Chapter 25
Port Manager Command
Port Manager Command List
 monitor session
 negotiation
 speed
 duplex
 flowcontrol
 mdi
 show flow-control
 show mdi-mdix
 show port-monitoring
monitor session
To enable and configure the port mirroring function.
Command
monitor session [session_number 1-1] { destination interface
<interface-type> <interface-id> | source interface
<interface-type> <interface-id> { rx | tx | both } }
no monitor session [session_number 1-1] { destination interface
<interface-type> <interface-id> | source interface
<interface-type> <interface-id> }
Syntax Description
session_number 1-1
Specify the ID of the mirror session.
destination interface
interface-type
interface-id
Specify the destination port of the mirror session.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.
source interface
interface-type
interface-id
Specify the source port of the mirror session.
Interface information including interface-type: Fa
(Fast Ethernet) or Gi (Gigabit Ethernet), and
slot/port number.
rx
Monitoring the traffic received from the source
port.
tx
Monitoring the traffic transmitted from the source
port.
both
Monitoring the traffic both received and
transmitted from the source port.
Default Settings
Disable