TRENDnet TL2-E284 - Spanning-Tree Restricted-Role; Spanning-Tree Restricted-Tcn

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
28-5
Command History
Version
History
1.00.001
This command was introduced
spanning-tree restricted-role
To enable the root guard function to prevent the port becoming a root port.
Command
spanning-tree restricted-role
no spanning-tree restricted-role
Default Settings
Disable
Command Modes
Interface Configuration Mode
User Guidelines
Using no form to disable the root guard function.
Example
switch(config-if)# spanning-tree restricted-role
Command History
Version
History
1.00.001
This command was introduced
spanning-tree restricted-tcn
To enable the topology change guard function to prevent the topology change
caused by this port.
Command
spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Default Settings
Disable
Command Modes
Interface Configuration Mode
User Guidelines
Using no form to disable the topology change guard function.
Example
switch(config-if)# spanning-tree restricted-tcn
Command History
Version
History
1.00.001
This command was introduced