TRENDnet TL2-E284 - Rmon Alarms Configuration

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
9-8
Interval
Specify the time interval for the history collection.
Owner
Specify the owner of the history entry.
Status
Specify the status of this history entry. The options are:
Valid - The history entry is valid.
Under Creation -
Invalid - The history entry is invalid and will be deleted.
Click Apply to submit the changes.
RMON Alarms Configuration
To set a RMON alarm to a MIB object.
Figure 81 – RMON > Alarms
Parameter
Description
Index (1~65535)
Specify the index of the RMON alarm.
Interval (1~2^31-1
secs)
The time interval in seconds that alarm monitors the MIB variable.
Variable
The MIB OID to set alarm.
Sample type
The type of the alarm sampling. The options are:
Absolute value - To test the MIB variable directly.
Delta value - To test the change between samples of a MIB variable.
Rising Threshold
(0~2^31-1)
The threshold value to trigger alarm when the number of sample exceeds.
Falling Threshold
(0~2^31-1)
The threshold value to reset alarm when the number of sample exceeds.
Rising Event Index
(1~65535)
The number of event to trigger when rising threshold is exceeded.
Falling Event Index
(1~65535)
The number of event to trigger when falling threshold is exceeded.
Owner
Specify the owner of the alarm entry.
Click Add to create a new RMON alarm, Reset to clear the value.
Parameter
Description
Select
Select a RMON alarm entry to apply the configuration changes.
Index
Specify the index of the RMON alarm.