TRENDnet TL2-E284 - Shutdown Dot

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-8
Syntax Description
quiet-period
value (0-65535)
The period that Switch will not do anything after a failed
authentication.
reauth-period
value (1-65535)
The period between re-authentication attempts.
server-timeout
value (1-65535)
The period that Switch waits for the re-transmission to the
RADIUS server.
supp-timeout
value (1-65535)
The period that Switch waits for the re-transmission to the
client.
tx-period value
(1-65535)
The period that Switch waits for a response to an
EAP-request/identity frame from the client before
retransmitting the request.
Default Settings
quiet-period - 60 seconds
reauth-period - 3600 seconds
server-timeout - 30 seconds
supp-timeout - 30 seconds
tx-period - 30 seconds
Command Modes
Interface Configuration Mode
User Guidelines
Using no form to reset the timers to default.
Example
switch(config-if)# dot1x timeout quiet-period 120
Command History
Version
History
1.00.001
This command was introduced
shutdown dot1x
To shutdown the 802.1X authentication.
Command
shutdown dot1x
no shutdown dot1x
Default Settings
Enable
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reactivate the 802.1X authentication.
Example
switch(config)# shutdown dot1x
Command History
Version
History
1.00.001
This command was introduced