TRENDnet TL2-E284 - Negotiation; Speed

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
25-2
Command Modes
Global Configuration Mode
User Guidelines
1. Using no form to disable the port mirroring function.
2. Destination port and source port have to be counfigured separately.
3. A port-channel can be mirrored, however, a port-channel port cannot.
Example
switch(config)# monitor session 1 destination interface fa 0/1
switch(config)# monitor session 1 source interface fa 0/2 both
Command History
Version
History
1.00.001
This command was introduced
negotiation
To enable auto-negotiation function to ports.
Command
negotiation
no negotiation
Command Modes
Interface Configuration Mode
User Guidelines
The configured port speed, duplex mode, and flow control only take effect when
auto-negotiation disabled.
Example
switch(config-if)# no megotiation
Command History
Version
History
1.00.001
This command was introduced
speed
To set the port speed.
Command
speed { 10 | 100 | 1000 }
Syntax Description
10
Port runs at 10Mbps.
100
Port runs at 100Mbps.
1000
Port runs at 1000Mbps.
Default Settings
The N-way result with link partner.
Command Modes
Interface Configuration Mode