TRENDnet TL2-E284 - Show Interfaces Etherchannel

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
30-10
Command Modes
Privileged EXEC Mode
Example
switch# show lacp 1 counters
LACPDUs LACPDUs
Port Sent Recv Pkts Err
------------------------------------------------
Channel group: 1
------------------
Gi0/1 788 704 0 0
Gi0/2 636 596 0 0
switch# show lacp 1 neighbor
Flags:
A - Device is in Active mode
P - Device is in Passive mode
Channel group 1 neighbors
Port Gi0/1
----------
Partner System ID : 08:01:02:03:04:05
Flags : P
LACP Partner Port Priority : 128
LACP Partner Oper Key : 2
LACP Partner Port State : 0x3c
Port State Flags Decode
------------------------
Activity : Passive
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing
Port Gi0/2
----------
Partner System ID : 06:01:02:03:04:05
Flags : P
LACP Partner Port Priority : 128
LACP Partner Oper Key : 2
LACP Partner Port State : 0x3c
Port State Flags Decode
------------------------
Activity : Passive
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing
Command History
Version
History
1.00.001
This command was introduced
show interfaces etherchannel
To display the etherchannel information of a port.