TRENDnet TL2-E284 - Chapter 26 Vlan Command; Vlan Command List; Vlan; Switchport Acceptable-Frame-Type

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
26-1
Chapter 26
VLAN Command
VLAN Command List
 vlan
 switchport acceptable-frame-type
 switchport ingress-filter
 switchport pvid
 ports
 debug vlan
 show vlan
 show vlan device info
 show vlan port config
vlan
To create a VLAN or enter a VLAN interface configured.
Command
vlan <vlan-id(1-4094)>
no vlan <vlan-id(1-4094)>
Syntax Description
vlan-id(1-4094)
Specify the VLAN ID to create or enter.
Command Modes
Global Configuration Mode
User Guidelines
Using no form to delete a VLAN.
Example
switch(config)# vlan 100
switch(config-vlan)#
Command History
Version
History
1.00.001
This command was introduced
switchport acceptable-frame-type
To configure the acceptable frame type of a port.
Command
switchport acceptable-frame-type {all | tagged |
untaggedAndPrioritytagged}
no switchport acceptable-frame-type