TRENDnet TL2-E284 - Ip Igmp Snooping Mrouter-Time-Out; Ip Igmp Snooping Port-Purge-Interval

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-3
Command
ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...>
no ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...>
Syntax Description
interface-type
0/a-b, 0/c, ...
Specify the type and ID of the static multicast router port.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Config-vlan Mode
User Guidelines
Using no form to delete a static IGMP multicast router port.
Example
switch(config-vlan)# ip igmp snooping mrouter int fa 0/1
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping mrouter-time-out
To set the time-out period that an IGMP multicast router port hasn‟t received
IGMP router control packet, it will be deleted.
Command
ip igmp snooping mrouter-time-out <(60 - 600) seconds>
no ip igmp snooping mrouter-time-out
Syntax Description
(60-600) seconds
Specify the time out period of IGMP multicast router
ports.
Default Settings
125 seconds
Command Modes
Global Configuration Mode
User Guidelines
Using no form to reset the time out period to default.
Example
switch(config)# ip igmp snooping mrouter-time-out 60
Command History
Version
History
1.00.001
This command was introduced
ip igmp snooping port-purge-interval
To set the purge interval that an IGMP member port hasn‟t‟ received IGMP report
packet, it will be deleted.