TRENDnet TL2-E284 - Show Snmp-Server Traps

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
17-19
Command
show snmp viewtree
Command Modes
Privileged EXEC Mode
Example
switch# show snmp viewtree
View Name : iso
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
Row Status : Active
------------------------------
View Name : ReadWrite
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
Row Status : Active
------------------------------
View Name : restricted
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
Row Status : Active
------------------------------
Command History
Version
History
1.00.001
This command was introduced
show snmp-server traps
To display the configured trap message information
Command
show snmp-server traps
Command Modes
Privileged EXEC Mode
Example
switch# show snmp-server traps
Currently enabled traps:
------------------------
linkup,linkdown,
Command History
Version
History
1.00.001
This command was introduced