TRENDnet TL2-E284 - Show Spanning-Tree Interface

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
28-16
MST00 00:74:24:00:01:00
Switch - cust1
MST00 00:74:24:00:01:02
Command History
Version
History
1.00.001
This command was introduced
show spanning-tree interface
To display the spanning tree states, statistics, settings information on a port.
Command
show spanning-tree interface <interface-type> <interface-id>
[{ cost | priority | portfast | rootcost | restricted-role |
restricted-tcn | state | stats | detail }]
Syntax Description
interface-type
interface-id
Specify the information of which interface to display.
Interface-type including Fa (Fast Ethernet), Gi
(Gigabit Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
cost
Display the port cost.
priority
Display the port priority.
portfast
Display the portfast state.
rootcost
Display the rootcost.
restricted-role
Display the setting of restricted-role function.
restricted-tcn
Display the setting of restricted-tcn function.
state
Display the spanning tree state
stats
Display the spanning tree statistics
detail
Display the detailed information of port and root
bridge.
Command Modes
Privileged EXEC Mode
User Guidelines