24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
40-3
cosq scheduling algorithm { strict | wrr }
The traffic in highest queue always process first.
Using weighted round-robin algorithm to handle packets in
priority queues.
Global Configuration Mode
switch(config)# cosq scheduling algorithm wrr
This command was introduced
switchport priority default
To setup the 802.1p priority for untagged packets.
switchport priority default <priority value(0-7)>
no switchport priority default
Specify which priority to set.
Interface Configuration Mode
The no form resets the priority to default value.
This command was introduced
show vlan traffic-classes
To display the current setting of 802.1p priority and traffic class mapping.
show vlan traffic-classes
To Next Page
Loading...
