TRENDnet TL2-E284 - Dot1 X Reauthenitcation; Dot1 X Timeout

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-7
Default Settings
Force-authorized
Command Modes
Interface Configuration Mode
Example
switch(config-if)# dot1x port-control auto
Command History
Version
History
1.00.001
This command was introduced
dot1x reauthenitcation
To enable the periodic re-authentication on ports.
Command
dot1x reauthenitcation
no dot1x reauthenitcation
Default Settings
Disable
Command Modes
Interface Configuration Mode
User Guidelines
UJsing no form to disable the 802.1X re-authentication.
Example
switch(config-if)# dot1x reauthenitcation
Command History
Version
History
1.00.001
This command was introduced
dot1x timeout
To configure the 802.1X timers.
Command
dot1x timeout {quiet-period <value (0-65535)> | {reauth-period
| server-timeout | supp-timeout | tx-period }<value (1-65535)>}
no dot1x timeout {quiet-period | reauth-period | server-timeout
| supp-timeout | tx-period }