TRENDnet TL2-E284 - CHAPTER 31 802.1 X Command; Command ist; Dot1 X Re-Authenticate; Dot1 X System-Auth-Control

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
31-1
Chapter 31
802.1X Command
802.1X Command List
 dot1x re-authenticate
 dot1x system-auth-control
 aaa authentication dot1x default
 dot1x local-database
 radius-server host
 dot1x control-direction
 dot1x default
 dot1x max-req
 dot1x max-start
 dot1x port-control
 dot1x reauthenitcation
 dot1x timeout
 shutdown dot1x
 debug dot1x
 debug radius
 show dot1x
 show radius server
 show radius statistics
dot1x re-authenticate
To initial a re-authentication request immediately on 802.1X enable ports.
Command
dot1x re-authenticate [interface <interface-type>
<interface-id>]
Syntax Description
interface
interface-type
interface-id
Specify the interface to send re-authentication request.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Privileged EXEC Mode
User Guidelines
System will initial the re-authentication to all 802.1X enable ports when executing
this command without a port parameter.
Example
switch# dot1x re-authenticate int fa 0/1
Command History
Version
History
1.00.001
This command was introduced