EasyManua.ls Logo

TRENDnet TL2-E284 - Page 208

TRENDnet TL2-E284
293 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
30-12
Example
switch# show interface gi 0/1 etherchannel
Port : Gi0/1
-------------
Port State = Down, Not in Bundle
Channel Group : 1
Mode : Active
Pseudo port-channel = Po1
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Admin Port = 25
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Defaulted
LACP Port Admin Oper Port Port
Port State Priority Key Key Number State
------------------------------------------------------
Gi0/1 Down 128 1 1 0x19 0xa2
switch# show interface etherchannel
Port : Gi0/1
-------------
Port State = Down, Not in Bundle
Channel Group : 1
Mode : Active
Pseudo port-channel = Po1
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Port Identifier = 25
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Defaulted
LACP Port Admin Oper Port Port
Port State Priority Key Key Number State
-------------------------------------------------------
Gi0/1 Down 128 1 1 0x19 0xa2
Port-channel : Po1
-------------------
Number of Ports = 1
HotStandBy port = null
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
MAC selection = Dynamic
Default Port = None
Command History
Version
History
1.00.001
This command was introduced

Table of Contents

Other manuals for TRENDnet TL2-E284

Related product manuals