24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
25-3
The configured port speed and duplex settings only takes effect when
auto-negotiation disabled.
switch(config-if)# speed 100
This command was introduced
To set the port duplex mode.
Port runs at full duplex mode.
Port runs at half duplex mode.
Interface Configuration Mode
switch(config-if)# duplex half
This command was introduced
To enable/disable 802.3x flow control on ports.
Interface Configuration Mode
switch(config-if)# flowcontrol on
To Next Page
Loading...
