TRENDnet TL2-E284 - Show Ip Igmp Snooping Globals; Show Ip Igmp Snooping Groups

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
32-10
Command History
Version
History
1.00.001
This command was introduced
show ip igmp snooping globals
To display the current global settings of IGMP snooping function.
Command
show ip igmp snooping globals
Command Modes
Privileged EXEC Mode
Example
switch# sh ip igmp snooping globals
Snooping Configuration
-----------------------------
IGMP Snooping globally enabled
IGMP Snooping is operationally enabled
Transmit Query on Topology Change globally disabled
Multicast forwarding mode is MAC based
Proxy reporting globally disabled
Router port purge interval is 125 seconds
Port purge interval is 260 seconds
Report forward interval is 5 seconds
Group specific query interval is 1 seconds
Querier query interval is 125 seconds
Reports are forwarded on router ports
Group specific query retry count is 2
Command History
Version
History
1.00.001
This command was introduced
show ip igmp snooping groups
To display the IGMP snooping group information
Command
show ip igmp snooping groups [Vlan <vlan id> [Group <Address>]]
Syntax Description
Vlan vlan id
Group Address
Command Modes
Privileged EXEC Mode
User Guidelines
System will display all the IGMP group information snooped by the Switch when
executing the command without given VLAN and group address parameters.