TRENDnet TL2-E284 - Snmp View

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
17-7
passwd
Authentication password
priv DES passwd
Encryption password
volatile
Store in volatile memory
nonvolatile
Store in nonvolatile memory
Default Settings
User : initial
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
------------------------------
User : ReadOnly
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
------------------------------
User : ReadWrite
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Non-volatile
------------------------------
User : templateMD5
Authentication Protocol : MD5
Privacy Protocol : None
Storage Type : Non-volatile
------------------------------
User : templateSHA
Authentication Protocol : SHA
Privacy Protocol : DES_CBC
Storage Type : Non-volatile
Command Modes
Global Configuration Mode
Example
switch(config)# snmp user operator1
Command History
Version
History
1.00.001
This command was introduced
snmp view
To create a SNMP view which limits the range of MIB objects that a SNMP
administrator can access to. The no form deletes the SNMP view.
Command
snmp view <ViewName> <OIDTree> [mask <OIDMask>] {included |
excluded} [{volatile | nonvolatile}]
no snmp view <ViewName> <OIDTree>
Syntax Description
ViewName
SNMP view name
OIDTree
The object ID of MIB tree
mask OIDMask
The mask of OID
included
Includes the object in the list that the SNMP administrator can
access