TRENDnet TL2-E284 - Show Ip Interface; Show Ip Route

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
15-5
Example
switch#debug ip dhcp client all
Command History
Version
History
1.00.001
This command was introduced.
show ip interface
To display the IP interface information.
Command
show ip interface
Command Modes
Privileged EXEC mode
User Guidelines
This command is to display the IP interface information.
Example
switch#show ip interface
vlanMgmt is up, line protocol is down
Internet Address is 0.0.0.0/0
Broadcast Address 255.255.255.255
IP address allocation method is dynamic
IP address allocation protocol is dhcp
Command History
Version
History
1.00.001
This command was introduced.
show ip route
To display the IP route information.
Command
show ip route [ { <ip-address> [<mask>] | bgp | connected | ospf
| rip | static | summary } ]
Syntax Description
<ip-address>
<mask>
Network address and subnet mask of IP route.
bgp
BGP routes.
connected
Directly connected routes.
ospf
OSPF routes.
rip
RIP routes.
static
Static routes.
summary
Summary of all IP routes.
Command Modes
Privileged EXEC mode